14
CARE AND MAINTENANCE
BELT ADJUSTMENT
The running belt is pre-adjusted to the running deck at the factory, but after prolonged use it
can stretch and require readjustment. To adjust the belt, turn on the main power switch of the
treadmill and let the belt run at a speed of 8-10 KPH. Use the 6 mm Allen Wrench provided to
turn the rear roller adjustment bolts in order to centre the belt. If the running belt is shifting to
the left, turn the left adjustment bolt 1/4 turn clockwise, and the running belt should start to
correct itself.
If the running belt is shifting to the right, then turn the right adjustment bolt 1/4 turn clockwise,
and the belt should start to correct itself. Keep turning the adjustment bolts until the running
belt is properly centered.
If the running belt is slipping during use, turn off and unplug the treadmill. Using the 6 mm Allen
Wrench provided, turn both left and right rear roller adjustment bolts 1/4 turn clockwise, then
turn the main power switch back on and run the treadmill at a speed of
8-10 KPH. Run on to the running belt to determine if the belt is still slipping. Repeat this
procedure until the belt no longer slips.
Summary of Contents for F4H-TM-JK06
Page 19: ...19 ...