background image

12

MAINTENANCE

CLEANING

The air bike can be cleaned with a soft clean damp cloth.Do not use abrasives or solvents on plastic 
parts.

Please wipe your perspiration off the bench after each use.Be careful not get excessive 

moisture on the computer display panel as this might cause an electrical hazard or electronics to 

fail.

Please keep the bench, especially the computer console out of direct sunlight to prevent screen 

damage.

Please inspect all assembly bolts and pedals on the machine for proper tightness every week

STORAGE

Store the bench in a clean and dry environment away from children.

TROUBLESHOOTING

PROBLEM

SOLUTION

There is no display on the computer 

console.

1.  Remove the computer console and verify 

the wire that comes from the computer 

console is properly connected to the wire 

that comes from the handlebar post.

2.  Check if the batteries are correctly 

positioned and battery springs are in 

proper contact with batteries.

3.  The batteries in the computer console 

may be dead. Change to new batteries.

The air bike wobbles when in use

Turn the cushion on the rear stabilizer as 

needed to level the air bike.

The air bike makes squeaking noise when 

in use.

The bolts may be loosen on the air bike. 

Please inspect all of the bolts and tighten any 

loosen bolts.

Summary of Contents for F4H-EB-KPR4890W


















Reviews: