5.
PROGRAM
烉
Before exercise in Program mode, user may set up TIME target.
Press UP and DOWN to select Program with 12 profiles and press ENTER/MODE to confirm.
Level can be adjusted during exercise by press UP or DOWN.
6.
H.R.C.
烉
Before exercise, computer will ask for user AGE first to calculate TARGET pulse. User may still
press UP and DOWN to change target pulse from 30 to 230.
7.
USER
PROGRAM
烉
User may press UP, DOWN and then press MODE to create his own profile. (from column 1 to
column 20) User may hold on pressing MODE button for 2 seconds to quit profile setting.
8.
WATT
:
The preset watt value 120 is flashing on screen in WATT setting mode. User may use UP, DOWN
button to set target value from 10 to 350. Press MODE button for confirm.
9. RECOVERY :
After exercising for a period of time, keep holding on handgrips and press “RECOVERY”
button. All function display will stop except “TIME” starts counting down from 00:60 to 00:00.
Screen will display your heart rate recovery status with the F1,F2….to F6. F1 is the best,
F6 is the worst. User may keep exercising to improve the heart rate recovery status.
(Press the RECOVERY button again to return the main display.)
NOTE:
1. This computer require 6V, 0.5mA adaptor.
2. When user stop pedaling for 4 minutes, computer will enter into power save mode, all setting and
exercise data will stored until user start exercise again.
3. When computer act abnormal, please plug out the adaptor and plug in again.
Handleiding Hometrainer Fit Bike Ride 2
