MAN-00112 R 2.0 - EasyGrid Base User Guide
8
3.2 Safety Information
The level of radiation is below the level known to cause eye injury through accidental short-term exposure.
However, avoid prolonged exposure to light emitted from the fiber and do not stare directly at a light beam,
visible or not.
The following safety instructions must be observed whenever the EasyGrid Base is operated. Failure to
comply with any of these instructions or with any precaution or warning contained in the Fiber Optic
Thermometer and Client Software user’s guide is in direct violation of the standards of design, manufacture
and intended uses of the EasyGrid Base. FISO assumes no liability for the customer failure to comply with
these safety requirements.
THIS PRODUCT IS NOT DESIGNED FOR USE IN LIFE SUPPORT OR CRITICAL APPLICATIONS.
In no case will FISO be liable to the buyer, or to any third parties, for any consequential damage or indirect
damage which is caused by product failure, malfunction, or any other problem.
When using any electrical appliance, basic safety precautions should be followed, including the following:
FISO recommends using SEN-PS-EGRID power supply with your monitor and verify that the voltage
specifications indicated on the power supply are compatible with the AC voltage and frequency delivered at
the power outlet.
CAUTION
Install the unit in a protective enclosure.
Do not operate in wet/damp conditions.
Do not expose to outdoor conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
WARNING
This equipment must be used as specified or the protection
provided by the equipment may be compromised. You must use
this product in a normal mode and should not deviate from the
written instructions provided.
