MAN-00112 R 2.0 - EasyGrid Base User Guide
32
Appendix A:
Cleaning fiber optic connectors
The EasyClean is a high-performance device, designed to ease connector ferule end faces cleaning.
Read carefully the instructions below before using the device.
Important
The EasyClean is designed to clean the fiber optic connectors.
FISO is not liable for any damage caused in attempts to use this device to other applications.
Always keep the protection cap on when not in use to avoid contamination
.
EasyClean tool general operation
The EasyClean is easy to use, but you need to be careful not to do the following:
•
Do not use this tool to clean oily connector, as this will cause contamination of the cleaning cloth.
•
Do not touch the cleaning cloth, as this will cause contamination.
•
Do not pull the cleaning cloth, use only the device body.
•
Do not attempt to disassemble as this can cause damage to the device and make is inoperable.
•
Do not try to re-use the cleaning cloth as this will eliminate the cleaner’s effectiveness
•
Do not use this cleaner when the cloth is empty. This may cause damage to the connector.
The amount of cloth left in the tool is shown in the window located in the body.
Here are typical inspection pictures of an optical connector made with a Fiber inspection probe
Before Cleaning
First click Cleaning
Second click Cleaning
