VPP50 Vacuum Pickup System Operating Manual
© 2020 Fisnar
- 10 -
VPP50 Rev 01
MACHINE SET UP
FIG. 4: Machine Setup
1.
Connect air hose (1) from compressed air 70-100 psi (5-7 bar) to the air inlet port on the
back of the machine. See FIG. 4.
2.
Insert the air connector and ESD grounding plug (2) from the vacuum pickup pen to the
ports on the front of the machine. See FIG. 4.
If using optional vacuum pickup pen (#580046) only the air connector will need to be
attached to the port on the front of the machine.
3.
Insert the ESD grounding cable (3) into the port on the back of the machine. The other
end of the cable is to be connected to a suitable common ESD Safe grounding point
within the workplace environment. See FIG. 4.
If there is no requirement for the machine to be used in an ESD Safe work environment,
this step can be ignored.
1
2
3
