P/N 562179
REV. C Dec 2011
9
© 2011 Fisnar
Saving to Memory
The SL101N has the storage capacity for up to 9 programs that can be saved to its memory for future recall. The memory
will always save your current settings for the particular mode you are in.
For Example
: If you wanted to save your current Timer Mode setting to program 9 you would first need to select timer
mode then proceed with saving. You can also save your Cycle Mode settings to program 9 by following the same
procedure.
To save your current settings to memory address 9 follow the below instructions.
1. Change to the mode you would like to save then press and hold the
MEM
(Memory) key for 2 seconds until the
unit beeps.
2. The display will show Ld 1 (Load from Memory #1).
3. Press the
MEM
key again to change from
Ld 1
to
Sv 1
(Save to Memory #1).
4. Press the
▲
key 8 times to get to memory address 9.
5. Press the
EXIT
key to complete the save.
To save your current cycle mode settings switch the mode to cycle and then continue with the above procedure.