Fisheye FIX NEO Mini 1000 SWR FS, User Manual

Page: 23 / 28

- 23 -
Maintenance
- Use the bundled O-ring remover when you remove the O-rings. Do not use sharp tools such
as the edge of scissors or knife.
- Apply a thin coat of the bundled O-ring grease to prevent friction or deterioration of the O-rings.
Make sure that there is no sand, small lint or hair. Be careful not to apply too much O-ring
grease as it may attract more lint or dust.
- Do not use if there are any small cuts or cracks on the O-ring surface. Replace with spare
O-ring immediately.
- Make sure that there is no sand, small lint, hair, scratches or cracks on the O-ring groove and
the O-ring contact surface.
- Make sure the O-ring is uniform with no twists or bulges, when you install the O-ring to the
groove.
- Always perform checks of O-ring or O-ring groove and O-ring grease every time you remove
the light head.
The NEO Mini light is sealed by the exclusive O-rings. Two O-rings of the main body must do
maintenance by user. When you do not use the NEO for a long time, please apply a thin coat of
bundled O-ring grease to the O-rings. As well, replacement of the O-rings every year is
recommended.
O-ring
CAUTION