Fisheye FIX NEO Mini 1000 SWR FS, User Manual

Page: 21 / 28

- 21 -
How to operate
Turning-on
Automatic shut-off(ASO) mode
Power button
Built-in LED
Output adjustment
The output circulates in order of [100%] > [75%] > [50%] > [25%], each time the power button is
pressed.
The optical sensor may not detect the electronic flash light depending on the photography situation.
NOTE
Wide beam
When the NEO Mini is initially activated, by pressing the power button, the wide beam is turned
on.
Spot beam
Hold down the power button for about a second.
Red beam
Hold down the power button again for about a second. To back to the state of wide beam, hold
down the button again for about a second.
When the optical sensor detects an electronic flash light of camera, the sensor will disable the
emission. One second later, the light turns on automatically.
Wide beam
Hold down the power button for about two seconds, the wide beam is turned on with ASO mode.
Spot beam
Hold down the power button for about two seconds.
Red beam
Hold down the power button again for about two seconds.