Fisheye FIX NEO Mini 1000 SWR FS, User Manual

Page: 22 / 28

- 22 -
Please set the output amount to 25% or less when you needs to use in air.
Use caution when handling the light head in air may get extremely hot.
Please note that the remaining burn time display may differ from the actual burn time due
to the battery condition or the circumstances such as the surrounding water temperature.
High temperature protection mode
Turning-off
Holding down the power button for about four seconds.
When the light head becomes over 60
°C
(140°F), the output amount decreases to 20% of
maximum automatically. When the function engages, turning off the NEO Mini and cooling down
the light head is recommended. Please be careful not to touch the light head with bare hands, as it
is very hot. When the temperature becomes below 45
°
(113°F), the NEO Mini goes back to normal.
Safety mode
When the battery power is almost depleted, the output amount drops automatically to 20%, then
the built-in LED blinks red. The NEO Mini turns off about 10 minutes later.
Built-in LED
The built-in LED indicates the current battery power as below:
Normal mode
Green: Full charged / Red: Half or less / Red blink: Safety mode
ASO mode
Green blink: Full charged / Yellow and red alternate: Half or less / Red blink: Safety mode
Blink mode
Holding down the power button for a few seconds on normal mode, then the blink mode starts up.
This product is not designed to memorize the output amount when turned off.
NOTE
CAUTION
CAUTION