Fisher NV-E7000, Installation And Operation Manual

Page: 63 / 110

117
To complete setting…
press the
Ñ
button to
return the screen to the present
location map.
Press the
É
button to
return to the menu screen.
5
Select
and press the
Ä
button.
A mark is indicated.
Crossing Enlargement Display
... Indicates that this condition is set.
To change, press the
Ä
button again to delete the mark.
¡
If signal reception from the
GPS satellite is cut rendering
accurate positioning impossible
or if there is a significant error
in the GPS data, the
intersection enlargement
function will not operate
properly. Also, if the distance
between intersections is too
short, this function will be
disabled.
¡
Even if having placed a
mark in
,
the display will not appear
without having approached the
intersection.
¡
Because the display is based
on the data stored on the map
disc,
– intersection enlargement
display and junction view will
not be effectuated at
intersections and junctions
not available in the stored
data.
– depending on the
intersection, the intersection
name may not be indicated.
Crossing Enlargement Display
Hint
– because the data in the map
disc is only as updated as
the time of purchase, the
displayed content may differ
from actual conditions.
¡
The junction views in the map
disc included with the unit
correspond to only some
highways.
¡
When intersections are
enlarged, the right screen
changes into an intersection
enlargement
illustration/junction view.
Hint
SETTING THE 2-SCREEN DISPLAY (2)