Page 9
Isotemp Economy Incubators
Service
The following sections describe procedures for servicing the 500 Series
incubators. Replacing or adjusting the Glass Door should be within the
capabilities of most users and does not expose the operator to live
voltages (wiring). All other Service procedures involve potential
exposure to line voltage. These procedures should be undertaken only by
qualified service personnel. The next section,
Accessing the Electronics
Compartment,
describes procedures required of subsequent service
sections and is referenced by these later sections when required.
For Technical Assistance call: 1 (800) 926-0505
For Field Service Division Assistance call: 1 (800) 395-5442
Caution:
Service procedures involve exposure to line voltage
and should be done only by qualified service
personnel. Disconnect incubator from power
source before attempting repairs.
Summary of Contents for Isotemp 500 Series
Page 2: ......
Page 7: ......
Page 23: ...Page 19 Isotemp Economy Incubators Electrical Schematic ...
