accumet AB330 Conductivity Meter 7
Chapter 2
Getting Started
2.1 Electrode Holder
Installation
The meter-attached electrode holder (Catalog Number 13-
637-671) can be installed on either side of the meter.
Unpack the base plate and stand with electrode
holder from the meter box.
Turn the meter over, with the meter display facing
down, on a clean dry surface.
Identify the side of the meter that the holder will be
installed on and remove the screw between the
circles on that side of the meter.
Align the base plate of the holder with the circles
on the meter.
Replace the screw from step 3 to attach the base
plate to the meter.
Turn the meter over, with meter display facing up.
Insert the stand with electrode holder into the
metal post on the base plate.
Place the electrodes into the electrode holder.
2.2 Universal Power
Supply Assembly
A universal power adapter (Catalog Number 13-637-010)
with US/Japan, Euro, UK/Singapore, Australia/New
Zealand and China wall plug plates is included with the
meter. This universal power adapter is specifically for use
with this meter. Use of other power adapters can damage
the meter and will void the warranty.
Unpack the power supply provided with the meter.
Select the appropriate wall plug plate for the
power outlet that will be used.
Slide the appropriate wall plug plate into the
groove on the back of the power adapter.
Connect the assembled power adapter to a power
outlet and meter input.
a.
To connect the power adapter with the meter,
insert the power adapter plug and twist to lock
the connection.
Note: The power adapter plug has two prongs that allow
the power adapter to be locked onto the meter. These two
prongs must be properly aligned when connecting it to
ensure it is fully connected and locked onto the meter.
You are now ready to turn on the meter.
CAUTION: Use of a surge protector or
uninterrupted power supply (UPS) is
recommended, as an unintended power
surge of electricity to the meter may
damage the meter and void the warranty.
Summary of Contents for Fisherbrand accumet AB330
Page 2: ......
