accumet AB330 Conductivity Meter 15
3.2.4b Manual Temperature Input
When no ATC probe is connected, use the Manual
Temperature Input menu to enter the sample temperature
value, from -5.0 °C to 105.0 °C.
Press the
or
key to scroll through the Setup
Menu list until the Manual Temperature Input item
is shown.
Press the
or
key to adjust the temperature
value.
a.
Press the
key to increase the value by 0.1°.
Press and hold the
key to quickly increase.
b.
Press the
key to decrease the value by 0.1°.
Press and hold the
key to quickly decrease.
Press the “Enter” key to save the change.
3.2.5 Measure Mode
Set the measure mode to conductivity, salinity or TDS.
Press the
or
key to scroll through the Setup
Menu list until the Measure Mode item is shown.
Press the
or
key to set the measure mode.
Press the “Enter” key to save the change.
3.2.6 Nominal Cell Constant
Set the nominal value for the cell constant (K) of the
conductivity electrode being used.
The entered nominal cell constant (K) is used to determine
conductivity, salinity and TDS measurement values from
the conductance reading. Once a calibration is performed,
the entered nominal cell constant (K) multiplied by the
calculated calibration factor is used to determine
conductivity, salinity and TDS measurement values from
the conductance reading.
The entered nominal cell constant (K) is also used for
automatic conductivity standard recognition during
conductivity calibrations.
Press the
or
key to scroll through the Setup
Menu list until the Nominal Cell Constant item is
shown.
Press the
or
key to set the cell constant (K)
value.
Summary of Contents for Fisherbrand accumet AB330
Page 2: ......
