Fisher Scientific Fisher Sei 100L Gravty, Operation Manual

Page: 36 / 63

| Operation
28
|
50145736 Fisherbrand
Chapter 6
4. Load the work space with samples.
Risk of overloading
Overloading may damage the shelves or cause the shelves and/or the oven to tilt when
the shelves are being drawn out, ultimately destroying the samples. To avoid
overloading the oven or its shelving be sure to observe the sample weight limits
specified in See “Technical Data” on page 47.
Hot surfaces
After opening the door, this may swing back automatically.
The interior panel of the outer door as well as the surfaces of the outer housing, the
shelving and the work space become extremely hot while the oven runs through its
heating cycles.
When removing samples from a running or recently completed heating cycle, always
wear safety gloves and other appropriate personal protection equipment to avoid
burns on hot surfaces!
NOTE
Proper loading
To ensure sufficient air circulation and uniform heating of the samples, do not use more
than 70% of the maximum surface area of the work space. Bulky objects in the work
space that dissipate heat may impair heat distribution.