Fisher Scientific accumet AP 110 accumet AP 115 accumet AP 125, Instruction Manual

Page: 24 / 24

20
12. ERROR MESSAGES
ERROR DESCRIPTION
Low battery indicator “ LobAt” will show on the
LCD before the meter goes off. This indicates
that battery power is low and that the batteries
need to be replaced.
Or “Over-range” when reading >20 pH, >2000 mV,
or >99900 Ion
Ur “Under-range” when reading <-2 pH or <-2000
mV
CAL
Error Calibration error appears if reading is not within
the allowable pH buffer calibration range.
SLOPE
Error Appears if the electrode slope is not within the
acceptable range.
13. REPLACEMENT PARTS & ACCESSORIES
Item Description Catalog No.
AP110 Meter Only 13-636-AP110A
AP110 Meter Kit 13-636-AP110
AP115 Meter Only 13-636-AP115A
AP115 Meter Kit 13-636-AP115
AP125 Meter Only 13-636-AP125A
AP125 Meter Kit 13-636-AP125
Refillable, pH/ATC electrode, Single Junction 13-620-AP50A
Refillable, pH/ATC electrode, Double Junction 13-620-AP61
Gel-filled, pH/ATC electrode, Double Junction
13-620-AP52
Refillable, ORP/Redox electrode 13-620-81
Ammonia Ion Selective electrode 13-620-509
Chloride Ion Selective electrode 13-620-627
Fluoride Ion Selective electrode 13-620-629
Sodium Ion Selective electrode 13-620-503A
Stainless Steel ATC probe 13-620-AP53
Hard Portable Meter Carrying Case Kit 13-636-AP69
110/220 VAC Power Adapter 13-636-100
pH 4,7,10 Buffer pack, 500 mL bottles SB105
pH 4,7,10 & Rinse, 20 mL pouches x 5 each 13-300-147
For a complete selection of electrodes and accessories,
please refer to the Fisher Scientific Catalog, website, or
contact your Fisher Scientific Sales Representative.
To place an order, call 1-800/766-7000, fax 1-800/926-1166, or
online
www.fishersci.com
For technical support, call 1-888-358-4706 or email
accumet@thermofisher.com