5
1
2
3
Fit the upper and lower walls together, as shown.
•
Insert four screws into the holes in the wall assembly and tighten.
•
Place the bases on a flat surface, as shown.
•
Fit the wall assembly into each base and push to
•
“snap”
in place.
Hint:
The wall is designed to fit the bases one way. If it does not
seem to fit, turn or switch one or both bases around and try again!
Walls
Bases
4 Screws
Assembly
4
Locate the ramp labeled with a
•
2
.
Fit the ends of the ramp into the slots in the wall, as shown.
•
Hint:
The tab at the top of the ramp has a blue dot on it. Match
this dot to the slot with the blue dot.
Blue Dots
Top View
Top View
Ramp
Labeled 2
