background image

9

Notes About

Dry-Erase Markers

•  Use only the dry-erase washable markers that came with 

this toy.

•  Dampen a soft cloth with water and wipe to clean the easel 

board or backgrounds.

IMPORTANT!

•  To completely remove marker residue from the easel board or 

backgrounds, dampen the eraser and wipe after each use.

•  Markers conform to ASTM D4236. Avoid contact with carpet, 

clothing, walls and furniture. Do not use permanent markers 
on the easel surface or dry-erase accessories. Recap 
markers after use. Adult supervision is recommended.

•  To remove marker from the skin, simply use soap and water.

United States Only

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one 
or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Consult the dealer or an experienced radio/TV technician

for help.

Note: Changes or modifications not expressly approved by the 
manufacturer responsible for compliance could void the user's 
authority to operate the equipment.

FCC Statement

Easel Height Adjustment

•  Fit your hands through the handles and squeeze the 

release levers 

A

.

•  Lift the easel board 

B

 and let go of the release levers.

•  Lower the easel board until it 

“clicks”

 into the middle height 

position 

C

 or the lowest height position 

D

.

•  To raise the easel board to a higher position again, simply 

lift until it 

“clicks”

 into place.

A

B

C

D

Easel Adjusts to Three Different Heights!

Summary of Contents for Spark Art Easel K0026













Reviews: