W6202pr-0920
9
Steering
Wheel Cap
Steering
Wheel
• Turn the vehicle upright.
• Fit the steering wheel cap into the center of the
steering wheel.
• Insert two #6 x 1" (2,5 cm) screws into the steering
wheel cap and tighten.
• Insert the seat front tabs into the slots inside the vehicle.
• Then, insert the lock fastener tabs on the back of the
seat into the slots in the vehicle.
• Using a slotted screwdriver, turn each lock fastener
a
1
/
4
turn to the locked position.
IMPORTANT!
Remember to keep the lock fasteners
locked at all times to prevent children from accessing
the vehicle battery compartment.
Locked
Seat
Lock Fastener
Tabs
Hubcap Cover
Slots
Tab
Tab
Tab
• Insert one of the tabs on the hubcap cover into a slot
in the hubcap.
• Then, push with your fingernail (or carefully with
a slotted screwdriver), the other two hubcap cover
tabs into the slots in the hubcap.
• Repeat this assembly step to attach the other three
hubcap covers.
ASSEMBLY
6
7
8
DASH VIEW
REAR VIEW
SIDE VIEW
Unlocked
