(SHOWN ACTUAL SIZE)
1.5V x 2
"AA" (LR6)
• Turn the right arm upside down to locate the
battery compartment.
Helpful Hint: The right arm has a musical note.
• Loosen the screw in the battery compartment
cover with a Phillips screwdriver. The screw will
remain in the cover.
Battery Compartment
Cover
Battery
Compartment
Right
Arm
4
Bottom View
Assembly
• Position one of the legs upside down.
• Fit the tabs on the inside of a foot into the
grooves in one end of the leg.
• Push down on the foot to be sure the foot is
secured to the leg.
• Repeat this procedure to attach a foot to the
other side of the leg, and to attach the remain-
ing two feet to the other leg.
• Position a leg on its side on a flat surface with
the holes facing up.
• With the seat facing you, fit the pegs on the
side of the seat into the holes in the leg. Make
sure the pegs are inserted completely into the
holes.
• Fit the holes in the other leg onto the pegs on
the other side of the seat. Make sure the pegs
are inserted completely into the holes.
• Turn the chair assembly upright.
• Insert two plugs and a hanger into the side of a
leg as shown.
Helpful Hint: To make it easier to insert the
plugs and hangers into the legs, gently squeeze
the tabs together by hand before inserting them
into the holes.
• Place your hand on the inside of the leg and
push firmly on the plugs and hanger to snap
them through the leg and seat.
• Repeat this procedure to snap plugs and a
hanger into the other leg.
Leg
Foot
Tab
Groove
Leg
Arm
Support
Seat
Holes
Pegs
Plug
Hanger
1
2
3
2
