29
IMPORTANT!
Make sure the cord is taught
between the Lumalou™ unit and cord wrap
cleat. Excess cord can form loops and
present a strangulation hazard.
Extend the cord straight down the wall to
the cord wrap.
Wrap the cord around the cord wrap,
leaving just enough to reach the wall outlet.
Make sure there is no slack.
Slide the lever on the front of the cord wrap
and thread the cord through the groove in
the front of the cord wrap. Make sure the
cord is fully inserted in the groove.
Plug the cord into the AC adapter.
Plug the AC adapter into the wall outlet.
Use the AC adapter only in a wall outlet. Do
not plug the adapter into a ceiling outlet.
If the Lumalou™ unit begins to operate
erratically, you may need to reset the
electronics. Unplug the AC adapter for
approximately 10 seconds and plug it back in.
13
Summary of Contents for Lumalou GWM53
