• Place the base tube on a flat surface as shown.
• Position the left and right base wires as shown.
• Insert the left base wire into the base tube, until the red
mark on the left base wire is covered by the base tube.
• Insert the right base wire into the base tube, until the red
mark on the right base wire is covered by the base tube.
Base Tube
Red
Mark
Red
Mark
Right
Base Wire
Left
Base Wire
OFF
• Position the seat back wire above the ends of the left and
right base wires as shown.
Make sure the seat back
wire bends backward.
• Fit one end of the seat back wire onto the left base wire,
until the red mark on the left base wire is covered by the
seat back wire.
• Position the footrest wire with soothing unit upright.
• Hook the footrest wire with soothing unit onto the ends
of the left and right base wires.
Seat Back Wire
Footrest Wire with
Soothing Unit
Left Base Wire
Rubber Foot
Right Base Wire
Metal Tabs
Metal
Tabs
• Slide a rubber foot onto the front of the right base wire.
Make sure the slots on the rubber foot fit over the metal
tabs on the right base wire.
• Repeat this procedure to attach the remaining rubber foot
to the left base wire.
Right
Base
Wire
Left
Base
Wire
Slot
Assembly
3
OFF
ON
• Turn the Deluxe Soothing Bouncer Seat frame
on its side
with the unconnected seat back and right base wires up,
as shown.
• Push down on the unconnected seat back wire and fit it
onto the right base wire, until the red mark on the right
base wire is covered by the seat back wire.
• Turn the Deluxe Soothing Bouncer Seat frame upright.
Make sure the seat back wire is securely attached to
the left and right base wires.
Seat Back
Wire
Right Base Wire
Slot
Red
Mark
Red
Mark
