background image

8

 Battery Installation

1,5V x 4

D (LR20)

•  Protect the environment by not disposing of this product with household waste 

(2002/96/EC). Check your local authority for recycling advice and facilities.

•  Loosen the screws in the battery compartment door with a Phillips screwdriver and 

remove the battery compartment door.

•  Insert four D (LR20) 

alkaline

 batteries into the battery compartment.

•  Replace the battery compartment door and tighten the screws.
•  If the swing begins to operate erratically, you may need to reset the electronics. Slide the 

power switch off and back on. 

Note:

 Low battery power may cause product movement to slow, sound to become faint or 

product to turn off all together. If this should happen, use the AC adapter as a power source 
or replace the batteries. Replace the batteries with four 

alkaline

 D (LR20) batteries.

Hint: 

Install batteries if you need to use this swing away from an outlet. We recommend 

using 

alkaline

 batteries for longer battery life.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn 
injury or ruin your product. To avoid battery leakage:
•  Do not mix old and new batteries or batteries of different types: alkaline, standard 

(carbon-zinc) or rechargeable (nickel-cadmium).

•  Insert batteries as indicated inside the battery compartment.
•  Remove batteries during long periods of non-use. Always remove exhausted batteries 

from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The 
batteries inside may explode or leak.

•  Never short-circuit the battery terminals.
•  Use only batteries of the same or equivalent type, as recommended.
•  Do not charge non-rechargeable batteries.
•  Remove rechargeable batteries from the product before charging.
•  If removable, rechargeable batteries are used, they are only to be charged under 

adult supervision.

Summary of Contents for BFX34

















Reviews: