9
Battery Charging
Pb
• Plug the charger connector into the battery
.
• Plug the charger into a standard 120 volt wall outlet
.
Note: If power flow to the wall outlet is controlled by a
switch, make sure the switch is “ON”.
• Before first-time use, charge the battery for at least 18
hours. Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each
use of your vehicle. Do not charge the battery longer
than 30 hours.
• Once the battery is charged, pull firmly on the charger
connector to disconnect it from the battery. Unplug the
charger from the wall outlet. The battery is now ready to
be installed in your vehicle. Please see the Battery
Installation section on page 20 for detailed instructions on
installing your battery. If your battery is already installed in
your vehicle, simply plug the motor harness connector
into the battery and replace the hood.
• Push the battery clamp.
• Remove the battery (it is inside a cardboard box) from the
battery compartment.
• Remove the battery from the cardboard box. Throw away
the cardboard box.
Battery
Charger
Connector
Battery
Battery
Clamp
1
2
