17
Assembly
Slots
Slots
Roll Bar
Tabs
Vase
Plug
Flower
• Fit the six tabs on the roll bar into the slots in the top,
rear edge of the vehicle.
• Push near each tab in until the roll bar “snaps”
into place.
25
Hood
Large
Tab
Large
Tab
Front Tab
Slot
Slot
Slot
• Fit the large tab on each side of the hood into the slots
in the front end of the vehicle.
• Now, push to “snap” the small tab on the front of the
hood into the slot in the front end of the vehicle.
26
• Fit the plug on the flower into the vase on the dash.
Hint: If you’d like to fasten the flower to the vase, insert
a #8 x
3
/
4
" screw into the bottom of the vase and tighten.
27
24
Steering
Wheel Tab
Steering
Wheel Cap
Notch
• Align the notch in the top of the steering wheel cap with
the tab in the center of the steering wheel and fit the
cap into the steering wheel.
• Insert two #6 x 1" screws into the steering wheel cap
and tighten the screws.
