![background image](http://html1.mh-extra.com/html/fisher-price/b9701/b9701_instruction_2297937008.webp)
8
Assembly
15
Base/Handle
Flared End
Handle
Cover
• Position the base/handle covers so that the flared end
faces the front of the trike.
• Fit the base/handle covers onto the trike rear frame near
the rear wheels.
• Insert two #10 x
¾
"
screws through each handle cover
and tighten.
• Insert 13 - #8 x
¾
" screws into the handle top and tighten.
13
• Place the base/handle assembly on a flat surface so that
the wheel retainers are upright.
• Fit the trike onto the base/handle assembly so that the
rear frame rests in the grooves in the base and the front
wheel fits between the wheel retainers in the base/handle.
14
Wheel
Retainers
Base/Handle
Grooves
• Fit the handle top and bottom to the end of the base,
as shown.
12
Handle Top
Base
Handle Bottom