Assembly
10
• Fit the bottom edge of the pad around the bottom edge
of the seat.
• Hook the elastic loops on each side of the pad to the peg
on the back of the accessory bins.
25
Elastic
Loop
Elastic
Loop
• Fit the toy bar plugs into the sockets on the swing tubes.
Hint:
If the toybar plugs do not fit into the sockets, turn the
toybar around. Now, fit the plugs into the sockets.
• Insert two 3.5mm x 1.25cm screws through each plug and
into each socket. Tighten the screws with a Phillips screw-
driver. Do not overtighten.
26
Plug
Toybar
Plug
Socket
Plug
Hub
3.5mm x 1.25cm Screw - 4
Shown Actual Size
B0323 Quick Response Swing 9/24/02 1:03 PM Page 10
