Assembly
• Fit the handle top and bottom to the end of the base, as shown.
Handle Top
Base
Handle Bottom
12
• Insert 13 - #8 x ¾" (1,9 cm) screws into the handle top
and tighten.
• Place the base/handle assembly on a flat surface so that the wheel
retainers are upright.
• Fit the trike onto the base/handle assembly so that the rear frame
rests in the grooves in the base and the front wheel fits between
the wheel retainers in the base/handle.
Wheel Retainers
Base/Handle
Grooves
14
13
Handle Cover
Flared End
• Position the base/handle covers so that the flared end faces the
front of the trike.
• Fit the base/handle covers onto the trike rear frame near the
rear wheels.
• Insert two #10 x ¾" (1,9 cm) screws into each base/handle cover
and tighten.
15
6
• While pushing down on the seat, insert the seat pin through the
hole in the seat and into a seat mount adjustment hole.
Seat Pin
11
