Setup and Use
IMPORTANT!
Test sound reception of this monitor before first time use and
whenever you change location of transmitter (see page X).
Set transmitter channel switch to same channel as receiver.
Place transmitter in same room with child. Point microphone directly toward
crib or play area.
Unwrap and fully extend AC adaptor cord for best transmission.
Insert AC adaptor jack into transmitter socket and plug into wall outlet.
Slide transmitter on/off switch to turn power on. Power indicator lights.
Place receiver where you will see or hear it.
Unwrap and fully extend AC adaptor cord for best reception. Insert AC adaptor
jack into receiver socket and plug into wall outlet.
Note:
To use a 9V alkaline battery for power source, refer to “Receiver Battery
Installation” instructions on this page.
Rotate receiver on/off/volume dial to turn power on. Power indicator lights.
Rotate on/off/volume dial to adjust volume
.
1
2
3
4
5
6
7
9