15
US
CA
Before you do your first wash
You owe it to yourself and your Fisher & Paykel
WashSmart
to have it installed correctly by an
Authorized Service Agent.
Before you start, it is a good idea to go through the following checklist:
1
Has the base packer been removed?
2
Is the drain hose threaded through the ‘U bend’ hose guide (with no
more than 3/4” (20 mm) extended) and hooked on to your standpipe or
tub/sink?
3
Is the hot hose connected to the hot valve marked ‘H’?
Is the cold hose connected to the cold valve marked ‘C’?
4
Is the washer leveled correctly, with the feet extended and cabinet
corners clear of the floor? Refer to pages 11 and 12.
5
Have you performed the installation test cycle? Refer to page 13.
WARNING!
Electric Shock Hazard
Read and follow the IMPORTANT SAFETY INSTRUCTIONS outlined in this
User Guide before operating this appliance, pages 3 – 5.
Failure to do so can result in death, electric shock, fire or injury to
persons.
WashSmart
water consumption
Load Size
Regular*
22 lb (10 kg)
31 G (117 L)
15.5 lb (7 kg)
28 G (108 L)
11 lb (5 kg)
25 G (93 L)
7 lb (3 kg)
18 G (69 L)
2 lb (1 kg)
13 G (49 L)
*Regular cycle is the default wash cycle for
WashSmart
.
Note: water consumptions are based on the
WashSmart
default settings.
