What?
How Often?
How?
Important!
1. Dampen a sponge with clean hot water.
2. Gently wipe off the soiling, but do not rub.
3. Press a dry towel gently on the gasket to
dry.
gasket.
• The gasket is essential for a good
seal. Take care not to rub, displace,
or damage it.
Cooktop Parts
What?
How Often?
How?
Important!
Burner caps and
brass flame spreaders
1. Check that the burner is
turned OFF and allow it to
cool.
2. Lift off the burner cap and
brass flame spreader.
3. Wash them in hot soapy
water, rinse, and dry.
• Use a stiff nylon brush
or straight-ended paper clip
to clear the notches of the
flame spreader.
4. Replace the flame spreader
and burner cap
correctly. See ‘Replacing
the burner parts’.
• Keep the notches of the flame spreaders
clear. Soiling may clog these and cause ignition
problems.
• Before replacing the burner parts, check
that they are dry. Wet burner parts may result in
an irregular flame.
• Before lighting a burner you have
reassembled, check that all of its parts are
positioned correctly. Incorrect assembly
can cause dangerous irregular flames and
ignition problems.
Ignitors
1. Check that the burner is
turned OFF.
2. Clean the ignitor with a
small brush (eg old
toothbrush) or cotton
• The ignitors must be kept clean and dry to
work correctly. Dirty or wet ignitors could cause
constant clicking and sparking, even if a flame is
present.
Updated: Sat, 01 Aug 2020 08:09:15 GMT
Powered by
5
