To Replace Side Racks
1. Supporting the side rack with your hand from
underneath, hold it almost horizontally and locate
the prongs into the mounting slots.
2. Ensure the prongs are fully inserted into the slots,
then lower the side rack carefully and gently push
the retaining wire underneath the lock stud.
Replacing the Burner Parts
When replacing the burners, make sure that the two locating pins on the bottom of the brass flame
spreader are properly aligned with the locating pin holes on the top of the simmer ring. Incorrect
alignment will produce a potentially dangerous flame and poor burner performance.
Updated: Sat, 01 Aug 2020 08:09:15 GMT
Powered by
13
