9
SECURE THE COFFEE MAKER TO THE CABINETRY
2
1
Fix the power cable with the clip.
The power cable must be long
enough to allow the appliance to
be extracted from the cabinet to
fill the coffee bean container.
Position the rails on the sides of
the cabinet.
Fix with the screws provided,
then extract them completely.
z
If the coffee maker is installed
over a warmer drawer, use
the top surface of this as a
reference to position the rails.
z
In this case, there will be no
surface to rest the rails on.
5
Use the levers at the front of
the rails to adjust the height of
the appliance.
If necessary, correct alignment of
the appliance by positioning the
spacers supplied under or at the
sides of the support.
4
min 22 1/16
(min 560mm)
3
Position the appliance on the
rails, making sure the pins
are correctly inserted in the
housings, then fix it with the
screws supplied.
