Fisher & Paykel PROFESSIONAL CPV3 Series, User Manual

Page: 15 / 20

Ensure that all burner parts are correctly fitted. Incorrectly assembled burners may
produce dangerous flames. Flames should be blue with no yellow tipping, and burn without
fluttering around the burner cap.
CARE AND CLEANING
Replacing burner parts
Burner cap
Flame spreader
Ignitor
Correct alignment
Incorrect alignment
WHAT? HOW? IMPORTANT!
Ignitors Ensure the burner is turned
OFF.
Clean the ignitor with a small
brush or cotton swab that has
been dipped into rubbing alcohol.
The ignitors must be kept clean
and dry to work correctly. Dirty or
wet ignitors could cause constant
clicking and sparking, even if a flame
is present.
Burner grates
Ensure grates have cooled
completely before carefully lifting
them off the cooktop. Place on
a protected surface. To remove
stubborn stains, soak the grates in
a mixture of clothes detergent and
water. Wash in a mixture of hot
water and dishwashing liquid, then
rinse and allow to dry. The grates
are also dishwasher safe. Take care, the grates are heavy.
Ensure you place a dish towel or
other soft cover on the surface before
putting a grate on it.
15