BURNER USE
Manual lighting
If the burner will not light after several attempts, or if there has been a power outage, the
burners can be manually lit. If you have attempted to light the burner with the ignition,
allow 1 minute for any accumulated gas to dissipate before manually lighting.
1
Carefully hold a battery operated lighter
near the desired burner.
When the burner is lit, turn the dial to any
setting between
HI
(high) and
SIM
(simmer).
When you have finished cooking, turn the
dial clockwise back to
OFF
.
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
2
3
4
Push the dial in and turn counterclockwise
to
LITE.
Hold the dial at
LITE
before turning
to a flame setting.
11
Summary of Contents for PROFESSIONAL CPV3 Series
Page 1: ...USER GUIDE US CA PROFESSIONAL CPV3 models GAS RANGETOPS ...
Page 19: ......
Page 20: ......