BURNER USE
If the flame is extinguished during a power failure, turn the dial back to
OFF
as the
burner will not automatically relight and gas may accumulate.
Identify the desired burner and the
corresponding dial.
When the burner is lit, turn the dial to any
setting between
HI
(high) and
SIM
(simmer).
When you have finished cooking, turn the
dial clockwise back to
OFF
.
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
1
2
3
4
Selecting and using burners
Push the dial in and turn counterclockwise
to
LITE.
Hold the dial at
LITE
before turning
to a flame setting.
You should hear a clicking sound when
setting to
LITE
. If no clicking sound is
present, turn the dial back clockwise to
OFF
and refer to ‘Troubleshooting’ for advice.
10
Summary of Contents for PROFESSIONAL CPV3 Series
Page 1: ...USER GUIDE US CA PROFESSIONAL CPV3 models GAS RANGETOPS ...
Page 19: ......
Page 20: ......