Fig.78 Fat fiter
Sliding shelf supports
The telescopic sliding shelf supports make it safer and easier to insert and remove the oven shelves and trays.
They stop when they are pulled out to the maximum position. Wipe the supports with a damp cloth and a mild
detergent only. Do not wash them in the dishwasher, immerse them in soapy water, or use oven cleaner on them.
To remove the sliding shelf supports:
1. Remove the side racks by unscrewing the fixing screws (Fig. 53).
2. Lay down the sliding shelf support and side racks, with the sliding shelf support underneath.
3. Find the safety locks. These are the tabs that clip over the wire of the side rack (arrow 1 in Fig. 56).
4. Pull the safety locks away from the wire to release the wire (arrow 2 in Fig. 56).
To re-fit the sliding shelf support onto the side racks:
1. Screw the side rack onto the oven wall.
2. Fit the sliding shelf support onto the top wire of a rack and press (Fig. 57). You will hear a click as the safety
locks clip over the wire.
Updated: Wed, 07 Oct 2020 12:30:37 GMT
Powered by
5
