• Assemble the backguard as shown in Fig. 2 and fix
it by screwing the five screws “A”.
Fig. 2
Location
The installation conditions, concerning protection against overheating of the surfaces adjacent to the cooker, must
conform to Fig.3a or 3b.
The appliance must be kept no less than 200 mm away from any side wall which exceeds the height of the hob surface
(Fig. 3a or 3b).
The appliance must be housed in heat resistant units.
The walls of the units must be capable of resisting temperatures of 75 °C above room temperature. Do not install the
appliance near flammable materials (eg. curtains).
If the cooker is located on a pedestal, provide safety measures to prevent it falling out.
Updated: Fri, 15 Jan 2021 11:10:49 GMT
Powered by
2
