![Fisher & Paykel OB60SC5LC User Manual Download Page 37](http://html1.mh-extra.com/html/fisher-and-paykel/ob60sc5lc/ob60sc5lc_user-manual_2295909037.webp)
35
CARE AND CLEANING
Refitting the side racks and catalytic panels
(some models only, purchased separately)
Fit the catalytic panel to the side rack
1
Ensure the panels are placed the correct way around:
the hole for the fixing screw goes to the front of the oven.
Note: The shiny side of the catalytic should face the
inside of the oven cavity.
2
Fit the rear prongs of the side rack through the
holes in the catalytic panel.
Replace the side rack
1
Slide the rear prongs of the side rack into the holes at the rear of the oven
2
Fit the side rack front tab (and catalytic panel if fitted) over the fixing screw.
3
Replace the fixing nut. You may use a coin to tighten the nut.
Fixing nut
Side rack
Rear prongs
Catalytic panel
(if fitted)