OPTIMISING THE VENTSURFACE BY SELECTING COOKTOP TYPE
10
To ensure best performance, the type of cooktop under the VentSurface needs to be selected after installing the appliance.
To select the type of cooktop
1
Make sure the VentSurface is on stand-by (plugged into a power outlet which is switched on but the fan is off ).
2
Press the
and
buttons simultaneously. A single horizontal segment will appear in the display.
3
Release and re-press the buttons simultaneously again to scroll through the types of cooktops:
Top segment – Gas
Middle segment – Induction
Bottom segment – Electric/Ceramic
4
To store the type of cooktop last selected, press the
or
button.
Gas
Induction
Electric
Ceramic
SELECTING FILTER MODE
11
After installation, the VentSurface has to be set to operate on aluminium mesh filter mode (if the extracted air is ducted outside) or carbon filter mode (if the extracted air is recirculated indoors).
To change between filter modes
1
Make sure the VentSurface is on stand-by (plugged into a power outlet which is switched on but the fan is off ).
2
Press the
button.
3a
The display will show the “-“ symbol, indicating that the VentSurface is set to
aluminium mesh filter mode
(external ducting).
OR
3b
The display will show the “C” symbol, indicating that the VentSurface is set to
carbon filter mode
(internal recirculation).
4
Press the
button and hold down for at least five seconds to change to the filter mode you want. The filter mode last selected will be activated.
(2,1) -2- 599480D izona vswall install A2 NZGB.indd 21/7/09 2:43:07 PM
(2,1) -2- 599480D izona vswall install A2 NZGB.indd 21/7/09 2:43:07 PM
