Fisher & Paykel HBD1200E, Installation Manual/User Manual

Page: 22 / 76

20
INSTALLATION INSTRUCTIONS
6
Prepare for electrical connection
Downdraft unit
●
Remove the cover of the terminal box from the downdraft unit Fig.14.
●
Decide whether the power source should enter the downdraft unit from below or
from the back and remove the respective knock out. Install a UL listed strain relief or
conduit fitting (not included) in the knock out Fig.15.
●
If the downdraft unit is being installed with a remote blower, remove the knock out
for the control cable.
●
With the assistance of another person, lift the downdraft unit into the prepared cutout
in the cabinet. The over counter mounting brackets should rest on the countertop.
●
Secure the downdraft unit to the floor and countertop with screws into the previously
drilled holes Fig.16.
●
Push the end caps into place on the downdraft unit on top of the counter and lock
them in place Fig.17.
FRONT
Fig.14
Fig.15
Fig.17
Fig.16
6 x
2 x
FRONT