Fisher & Paykel GC912 Service Manual Download Page 6

599328A 

 

1. Service 

requirements 

 

1.1  Health and Safety 

When servicing the cooktop, health and safety issues must be considered at all times.  
Specific 
safety issues are listed below with their appropriate icon. They are illustrated in the service 
procedures to remind service people of the issues.

 

 
 

 

 

 

 

 

 

 

Electrical safety

.  Isolate the cooktop from the electrical supply 

before servicing.  Failure to do so could result in an electric shock. 
 
 
 
 

Gas leak hazard

.  Isolate the cooktop from the gas supply if 

necessary before servicing and leak test after all gas related repairs. 
 
 
 
 

Sharp metal edges

.  Take care and use appropriate protection when 

handling sharp metal edges to avoid laceration.  

 

 
 
 
Gas fittings are 

torque sensitive

, over tightening could damage them 

and cause a gas leak.

 

 
 
 

 

 

Heat hazard

.  Ensure wiring is correctly routed away from potentially 

hot metal parts

 

 
 
 
 
Ensure the work area is clean and tidy at all times to avoid a hazard 
while service work is being carried out.  Clean the cooktop and tidy 
the work area after service work is completed.

 

 
 
 

1.2 General 

warning 

Only qualified gas and electrical service people should service this product. 
 

Summary of Contents for GC912















Reviews: