Fisher & Paykel E402BLX, Installation Instructions Manual

Page: 22 / 204

20
Trouble shooting
Problem Possible Causes What to Do
Water has poor
taste/odour. Refrigerator not used for an
extended period. Dispense 3 L or 3 qt water so fresh
water supply is replenished.
Water dispenser
does not work
and/or
icon
flashing.
Water supply turned off or not
connected. Turn water on.
Press dispenser for 2 mins to remove
trapped air from water line and to fill
the water system.
Supply line may be blocked. Check supply for kinks or leaks.
On first installation there may be
air in water system. To remove air, run a litre or a quart of
water through the dispenser.
Filter may be blocked and need
replacing. Replace filter (see back of this booklet
for Customer Care contact details).
Dispenser lock activated.
Hold down the and buttons for
2 seconds.
Water frozen in tank. Increase temperature to a warmer
setting in fresh food compartment and
freezer.
Water in first glass
is warm. Water dispenser not used for
extended period. Allow 24 hrs for water to cool to set
temperature.
Tank capacity used recently. Allow water time to cool.
Filter warning light
is flashing.
Filter needs replacing. Replace filter as soon as possible (see
pages 16 – 17).
Wet ice/ice
clumping. Low water pressure. Check water pressure.
Filter blocked. Replace filter (see pages 16 – 17).
Measured Fill
amount of water is
inaccurate. Measured Fill needs
recalibration. Recalibrate (see page 18).