20
ACTIVESMART™ SPECIAL FEATURES
Vegetable bin divider instructions (where fitted)
To fit the divider, insert divider into bin on an angle, straighten and slot into place.
To adjust the divider, fully extend the bin, partially lift the divider, slide sideways and
re-slot into position.
Vegetable bin divider
Bottle holder (where fitted)
●
●
The bottle holders can be used to store a variety of bottles.
●
●
To position the bottle holder in your refrigerator, simply slot the back edge of the bottle
holder onto the back trim of any shelf in the fresh food compartment.
●
●
If you are not using all or some of the bottle holders, the unused bottle holders can be
stacked up on top of one another so they do not take up unnecessary shelf space.
●
●
Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
Glass shelves
●
●
Glass shelves can be repositioned in the cabinet as desired.
●
●
Remove shelves by lifting up the back of the shelf and then pulling the shelf forward.
Roll out drawer (E415H model)
●
●
The roll out drawer is suitable for storing fruits and vegetables as well as tall bottles
and drinks.
●
●
A vent/baffle is located at the front of the drawer.
●
●
The temperature in the drawer can be adjusted by opening or closing this vent.
●
●
Opening the vent fully allows more cold air into the drawer. Typical operating
temperatures in this compartment are from 3°C to 9°C.
●
●
The closed vent situation is ideal for storage of tomatoes, tropical fruit, cucumber,
capsicum, etc as these foods do not keep as well at colder temperatures.
●
●
The open vent situation is suitable for most vegetables and fruits. Uncut fruit and
vegetables with protective skin (eg apples and pears) can be stored without wrapping.
●
●
To extend the storage life of other fruit and vegetables place them in loosely sealed
plastic bags. This will reduce moisture loss and prevent excess moisture build-up.
