12
INSTALLATION INSTRUCTIONS
4. Installation
Your Fisher & Paykel refrigerator is fitted with
front and rear rollers, designed for moving
the product in the forwards and backwards
direction.
Avoid moving the product in a sideways
direction as this may damage the rollers or the
floor covering/surface.
A
Your refrigerator will arrive with the front feet
wound up making moving the product into its
final location a simple task.
B
Roll the refrigerator into its final position making sure there is the correct air gap
between the product and surrounding cabinetry. See minimum clearance in cabinetry
dimensions table.
C
Adjust the front feet down until the refrigerator is leaning backward with the front
approximately 10mm higher than the back. This will ensure a good door closing action.
D
Aligning your refrigerator with cabinetry.
●
●
Align the sides of the refrigerator with the cabinetry by adjusting the hinge side
front foot.
●
●
Adjust the handle side foot until it touches the floor and takes a small amount
of weight.
●
●
Once the refrigerator is in place and aligned with cupboards/alcove gently push on
the front top and check if the product is rocking or stable.
Raise the front of
the refrigerator
Lower the front
of the refrigerator
Refrigerator feet