Fisher & Paykel DISHDRAWER DD60STX6HI1 Installation Manual Download Page 3

3

!

 WARNING!

Electric Shock Hazard 

Failure to follow this advice may result in 

electrical shock or death.

•  Fitting an integrated panel requires access to 

electrical service areas. This must be performed 

by a Fisher & Paykel trained and supported 

service technician or qualified person. 

•  Before fitting the front panel, the dishwasher 

must be disconnected from the power supply.

•  After installing the front panel, the installer 

must ensure that the following components 

are electrically earthed: the panel bracket and 

any custom metal component (e.g. handle) that 

extends past the rubber seal.

•  This appliance must be earthed. In the event of a 

malfunction or breakdown, earthing will reduce 

the risk of electric shock by providing a path of 

least resistance for electric current. This appliance 

is equipped with a cord having an equipment-

earthing conductor and an earthing plug.

•  Before installing the DishDrawer™ Dishwasher, 

remove the house fuse or open the circuit breaker.

•  The plug must be plugged into an appropriate 

outlet that is installed and earthed in accordance 

with all local codes and ordinances.

•  Do not modify the power supply plug provided 

with the appliance - if it will not fit the outlet, 

have a proper outlet installed by a qualified 

electrician. Do not use an extension cord, adapter 

plug or multiple outlet box.

•  The dishwasher must be completely enclosed at 

the time of installation.

!

 WARNING!

Electric Shock Hazard 

Failure to follow this advice may result in 

electrical shock or death.

•  WARNING - Improper connection of the 

equipment-earthing conductor can result in a 

risk of electric shock. Check with a qualified 

electrician or service representative if you are in 

doubt as to whether the appliance is properly 

earthed.

!

 WARNING!

Cut Hazard

Failure to use caution could result in injury.

•  Take care - panel edges are sharp.

SAFETY AND WARNINGS

SAVE THESE INSTRUCTIONS

The models shown in this installation guide may not be available in all markets and are subject to 

change at any time. For current details about model and specification availability in your country, 

please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

Summary of Contents for DISHDRAWER DD60STX6HI1





















Reviews: