Fisher & Paykel DISHDRAWER DD60DTX6HI, Installation Manual

Page: 7 / 20

7
CUSTOM PANEL DIMENSIONS
CUSTOM PANEL CONSIDERATIONS MM
A
Minimum upper door panel height* 442
B Minimum lower door panel height* 311
C Minimum door panel width 596
D
Toe kick panel height* 45 – 123
E
Door panel depth 16 – 20
F Minimum toe kick panel depth** 9
G Minimum clearance between door panels 8
H
Minimum clearance between top of door panel and countertop 2
I
Minimum clearance between toe kick panel and floor 12
J
Maximum extension of upper panel -
K Maximum extension of lower panel 50
L
Minimum inside cavity height 864
M
Minimum height from floor to top of bottom drawer panel*** 414
Maximum weight of each drawer panel (including handle) 9kg
*the top door panel may be extended up, or the bottom panel down from the fixed gap. Toe kick panel should be adjusted accordingly.
**if using supplied toe kick mounting screws. Panel can be fixed via screwing or gluing to the supplied mounting bracket.
***depending on adjustment of levelling feet
ISO PROFILE
Material specifications
z
Maximum weight of drawer panels must not exceed 9kg (including handle)
z
The panel should be adequately sealed to withstand moisture (50°C @
80% RH). The back and sides of the panel should be completely sealed
with a waterproof vapour barrier, such as polyurethane, to prevent damage.
z
The back of the panel should be completely flush so that the seal between
the panel and the rubber trim is maintained.
z
Installation outside these specifications may result in condensation on
cabinetry surfaces.
Toe kick
z
A minimum distance of 12mm between the floor and the base of the toe kick
must be maintained at all times.
z
Depending on the desired toe kick recess depth, the custom toe kick panel
will need to be aligned to different positions on the toe kick template to
clear the underside of the tub.
z
Toe kick panel height can be determined by using the below:
*based on a door panel depth of 18mm
Recess of 40 – 100mm*
Align to pre-finished panel as shown
40 – 100mm
a
B
j
k
c
d
B
a
l
I
e
f
g
m
h
e
f
l j i 783mm
- - = -
cavity height upper panel extension floor clearance toe kick height
l j i 801mm
- - = -
cavity height upper panel extension floor clearance toe kick height
40mm recess
installations:
40 – 100mm recess
installations:
Recess of 40mm*
Align to pre-finished panel as shown
40mm
Custom panel
Custom panel