Fisher & Paykel DISHDRAWER DD60DTX6HI, Installation Manual

Page: 5 / 20

5
TOOLS AND COMPONENTS
z
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
contact the dealer or retailer you bought the product from to report the damage.
z
Fisher & Paykel is not responsible for shipping damage.
Side mounting bracket
kits (2)*
*Optional | **Comes fitted to the product
Inlet hose rubber washer
(1)**
Drain hose support (1)
Flat-blade screwdriver
Phillips screwdriver Level
Top mounting bracket
kit (1)*
Drain hose joiner (1)
Powered driver
Pliers
Box cutter Pencil
Moisture protection
tape (1)
16mm Phillips screws (32)
Clamp (1) Hex socket (2) Panel bracket kits (2)**
Wire clip (2)
Supplied
Not supplied
PARTS SUPPLIED TOOLS REQUIRED
Flush pre-finished toe kick
panel (1)
Recessed pre-finished toe
kick (1)
To access installation videos
Scan the QR code with your smartphone or watch online at:
fisherpaykel.com/dishdrawer-install
INSTALL VIDEO
This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. It is
intended as an overview only of the installation process and is not intended to be used as a
standalone guide on how to install a DishDrawer™ Dishwasher yourself. Installation should be
undertaken by a Fisher & Paykel trained and supported service technician or qualified person.
Sound seal insulation