16
!6
INSTALLING A CUSTOM FRONT DRAWER PANEL
1
1
2
Electrical Shock Hazard
WARNING!
Before continuing, ensure that the product is
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or fire.
3
1
1
!6
-
A
REMOVE PANEL BRACKET FROM PRODUCT
Remove side pins and gently pull
off the panel bracket slightly.
Remove the Knock-to-Pause module
from the back of the bracket.
Knock-to-Pause module
Side Pin
!6
-
B
REMOVE THE KNOCK-TO-PAUSE MODULE
1
Disconnect the Earth Wire
from the bracket
2
Unplug the Knock-to-Pause module
from the controller.
