12
As you push product in, pull through hoses and cord,
ensuring they don’t get kinked or twisted.
IMPORTANT!
If product cannot be pushed in far enough, pull out
again and rearrange hoses and cord. Do not use
excessive force, as doing so may squash the hoses
and lead to incorrect operation.
2
1
3
Open the
drawer halfway.
Using a flat
bladed
screwdriver,
prise the grey
rubber plug out
of the trim
moulding.
Replace the grey
rubber plug back into
the trim moulding
and ensure the trim
seal is facing forward.
Repeat for all
four brackets.
Using a small
Philips screwdriver,
screw through the
trim moulding,
securing the side
mounting bracket
to the cabinetry.
Do not damage
the rubber trimseal
!3
-
A
SECURE TO THE CABINETRY ON THE SIDES
!2
-
A
PULL THROUGH HOSES & MOVE INTO THE CAVITY
!4
-
A
SECURE THE EXTERNAL VENT
Vent hose either through same cabinet
or adjacent cabinet as per Step 7b or 7c
After routing the vent hose through
and out the hole cutout, attach and
secure the vent by tightening the
four screws provided.
Airflow
2
1
